Introduction

Use this repair guide to replace a flip-stop bumper pad in a Motorola RAZR2 v9m.

Parts

No parts required.

Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone. The bumper is held in place with adhesive.  If you plan on reusing the bumper, then use clean tools to keep the surface sticky. Grab the bowed portion of bumper.  Gently lift and peel the bumper away from the phone.
  • Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone.

    • The bumper is held in place with adhesive. If you plan on reusing the bumper, then use clean tools to keep the surface sticky.

  • Grab the bowed portion of bumper. Gently lift and peel the bumper away from the phone.

    • Remember that the bumper will be sticky. Place it somewhere clean if you will be reusing it.

Add Comment

Deck the Halls
With tools and Fix Kits
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 238