Introduction

Use this repair guide to replace a battery in a Motorola RAZR2 v9m.

Push the rear cover toward the hinge of the RAZR2.  The panel will slide about 3 mm. Push the rear cover toward the hinge of the RAZR2.  The panel will slide about 3 mm.
  • Push the rear cover toward the hinge of the RAZR2. The panel will slide about 3 mm.

Pinch the top and bottom edges of the panel and pull it away from the RAZR2. The rear panel uses four small hooks to hold it in place.  If the panel will not easily pull away, slide the panel more toward the hinge. The rear panel uses four small hooks to hold it in place.  If the panel will not easily pull away, slide the panel more toward the hinge.
  • Pinch the top and bottom edges of the panel and pull it away from the RAZR2.

  • The rear panel uses four small hooks to hold it in place. If the panel will not easily pull away, slide the panel more toward the hinge.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Gently pull the white plastic tab to lift the battery away from the RAZR2. The white plastic tab is attached to the phone.  Only pull it enough to expose the edges of the battery.
  • Gently pull the white plastic tab to lift the battery away from the RAZR2.

  • The white plastic tab is attached to the phone. Only pull it enough to expose the edges of the battery.

To remove the battery, grasp its edges pull away from the phone. When installing a new battery, be sure the metal contacts on the phone line up with the ones on the battery.
  • To remove the battery, grasp its edges pull away from the phone.

  • When installing a new battery, be sure the metal contacts on the phone line up with the ones on the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 17

All Time: 648