Introduction

Changing the wrist strap may be easier if the rear cover is taken off first, but removing the rear cover is not required and risks damage to the rear of your device.

Parts

No parts required.

Locate the spring-loaded pin that attaches the wrist strap to the watch.
  • Locate the spring-loaded pin that attaches the wrist strap to the watch.

  • There is a tiny groove on the end of the pin. This is where you will place the tweezers.

Add Comment

Black Friday
Broken doesn't stand a chance.
Take care not to lose the spring-loaded pin when removing the strap.
  • Take care not to lose the spring-loaded pin when removing the strap.

  • Use the tweezers to compress the spring-loaded pin so the strap can be removed.

Add Comment

Pull the wristband away from the watch face. Pull the wristband away from the watch face.
  • Pull the wristband away from the watch face.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 other people completed this guide.

Steven Tan

Member since: 01/30/2015

257 Reputation

3 Guides authored

Team

Cal Poly, Team 17-32, Amido Winter 2015 Member of Cal Poly, Team 17-32, Amido Winter 2015

CPSU-AMIDO-W15S17G32

4 Members

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 14

Past 30 Days: 60

All Time: 2,509