Motorola Droid Turbo Battery Replacement

Step 1 Rear Case

• Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
Step 2



• Use a plastic opening tool to pry the rear case off of the rest of the device.
• Remove the rear case.
• The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.
Step 3 Midframe
• Remove the midframe bezel.
Step 4
• Remove the four Torx T5 screws securing the midframe plate.
Step 5
• Remove the midframe.
Step 6 Battery
• Use the point of a spudger to pop up the battery connector.
Step 7
• Fold the wireless charging coil away from the battery.
Step 8
• Use a spudger to gently pry the battery up from the rest of the device.
• The battery is secured with some moderate adhesive, so some force may be necessary.

Author

with 9 other contributors

Victor Chapman

Member since: 01/20/16

393 Reputation

1 Guide authored

Badges: 12

• 
• 
• 

+9 more badges

Team

USF Tampa, Team 15-5, Remmell Spring 2016 Member of USF Tampa, Team 15-5, Remmell Spring 2016

USFT-REMMELL-S16S15G5

3 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview