Introduction
The camera or flash may stop functioning or require eventual replacement. Here is a guide that offers that.
What you need
-
-
Pry off the back case gently using the iFixit opening tool.
-
-
-
Use a T5 Torx screwdriver to unscrew the nine silver screws from the housing frame.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
2 Comments
What’s the OEM number of the flash motherboard ‘coz my flash died and I want to buy a new one.
Any help is much appreciated!