Introduction

This guide will teach you how to remove the keypad

Image 1/3: Then find the back release circled in red. Image 2/3: Then find the back release circled in red. Image 3/3: Then find the back release circled in red.
  • First flip the phone over.

  • Then find the back release circled in red.

Add Comment

Image 1/2: Lift from the bottom! Image 2/2: Lift from the bottom!
  • Carefully remove the back using the release.

  • Lift from the bottom!

Add Comment

Image 1/3: After the battery has lifted about a 45 degree angle remove from phone. Image 2/3: After the battery has lifted about a 45 degree angle remove from phone. Image 3/3: After the battery has lifted about a 45 degree angle remove from phone.
  • Lift the battery from the right side.

  • After the battery has lifted about a 45 degree angle remove from phone.

Add Comment

Image 1/2: Under both are two screws, remove those as well. Image 2/2: Remove the other four screws on back of phone.
  • Remove the plastic pieces with metal spudge

  • Under both are two screws, remove those as well.

  • Remove the other four screws on back of phone.

Add Comment

Image 1/1: Lift off keypad and replace.
  • Carefully lift screen as to not snap wire that connects it (shown is a version in which the screen has been fully removed).

  • Lift off keypad and replace.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austin Quinn

Member since: 10/20/2016

401 Reputation

4 Guides authored

Team

UMass Dartmouth, Team 6-6, Martin Fall 2016 Member of UMass Dartmouth, Team 6-6, Martin Fall 2016

UMASSD-MARTIN-F16S6G6

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 22