1. Remove one 7 mm Torx  security  screw from the top left corner and two 5 mm  Torx security screws from the bottom left and top right corners of the circuit board.
    • Remove one 7 mm Torx security screw from the top left corner and two 5 mm Torx security screws from the bottom left and top right corners of the circuit board.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Solder the two wires connecting the circuit board to the motherboard.
    • Solder the two wires connecting the circuit board to the motherboard.

    Add Comment

    • Remove the two circuit wires by gently tugging on them.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Heather Carrillo

Member since: 09/12/2016

364 Reputation

2 Guides authored

Team

CSU Fullerton, Team 2-6, Bruce Fall 2016 Member of CSU Fullerton, Team 2-6, Bruce Fall 2016

CSUF-BRUCE-F16S2G6

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 205