Introduction

A damaged metal speaker covering may be bent or misshapen, causing it to continuously fall out of its place. This guide allows one to replace the covering to return the speaker to its original condition.

Parts

No parts required.

Remove the damaged metal speaker covering using the plastic opening tool. The covering may be damaged that it is already out of its original place. If this is the condition, you may skip this step.
  • Remove the damaged metal speaker covering using the plastic opening tool.

  • The covering may be damaged that it is already out of its original place. If this is the condition, you may skip this step.

Add Comment

Deck the Halls
With tools and Fix Kits
Line up the replacement metal covering with the interior square ridge of the speaker.
  • Line up the replacement metal covering with the interior square ridge of the speaker.

Add Comment

Firmly press the metal cover into the speaker until it is snug.
  • Firmly press the metal cover into the speaker until it is snug.

  • Super glue may be used to keep the cover in its place, although it is not necessary.

Add Comment

Finish Line

One other person completed this guide.

Caitlyn Higgins

Member since: 10/13/2015

134 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 219