Introduction

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

Begin disassembling the phone by removing the back of the phone and the battery.
  • Begin disassembling the phone by removing the back of the phone and the battery.

Add Comment

Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
  • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

Add Comment

Pry the font plastic component from the “motherboard” component.
  • Pry the font plastic component from the “motherboard” component.

Add Comment

Take out the old rubber keypad and replace with a new one.
  • Take out the old rubber keypad and replace with a new one.

Add Comment

Reassemble by following previous steps in reverse order.
  • Reassemble by following previous steps in reverse order.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Katherine

Member since: 02/13/2014

22 Reputation

2 Guides authored

Team

Ohio State, Team 1-5, Meza Spring 2014 Member of Ohio State, Team 1-5, Meza Spring 2014

OSU-MEZA-S14S1G5

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 481