Introduction

If the camera seems to have lost power, it is necessary to replace the main battery. This can be accomplished in a couple simple steps.

Parts

No parts required.

  1. Use the edge of a coin to twist open the battery compartment on the bottom of the camera. (Twist counterclockwise)
    • Use the edge of a coin to twist open the battery compartment on the bottom of the camera. (Twist counterclockwise)

    My used one had a pair of CR2 batteries in it, not a AA battery.

    Please revisit the battery type.

    W. S. SCOTT BOYD - Reply

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. When the compartment opens, pull the AA battery out of its slot.
    • When the compartment opens, pull the AA battery out of its slot.

    My used one had a pair of CR2 batteries in it, not a AA battery.

    Please revisit the battery type.

    W. S. SCOTT BOYD - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Conner Lawston

Member since: 04/21/2015

219 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 26

All Time: 1,423