Skip to main content

Introduction

Follow this guide to replace the Housing Assembly on your Milwaukee 5262-21 . You will be able to look at pictures, that will be useful in order to see which screws need to be removed.

  1. Remove the ten 19mm T20 Torx screws shown in red.
    • Remove the ten 19mm T20 Torx screws shown in red.

  2. Remove the red Housing Assembly by lifting it up off of the tool.
    • Remove the red Housing Assembly by lifting it up off of the tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adrien Andrade-Cain

Member since: 03/08/2019

181 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 255