Step 1 Flip your laptop over




• Close your laptop and lay it down so the rubber feet are facing up.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2 Remove the feet




• Gently slide one arm of your angled tweezers into the recess near the upper right edge of one of the feet.
• You can also use the point of a spudger. However, you're more likely to damage the foot, if you're reusing it.
• Use your tweezers to pry up and remove the foot.
• The feet may eject very quickly—be careful not to lose them.
• Repeat the process to remove the remaining feet.
• To install a foot, align the pegs on the bottom with their cutouts in the frame and press the foot into place.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-174589" src="https://www.ifixit.com/Guide/embed/174589/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-174589"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/174589" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview