Skip to main content

Microsoft Lumia 640 LTE Headphone Jack Replacement

What you need

  1. Microsoft Lumia 640 LTE Headphone Jack Replacement, Back Cover: step 1, image 1 of 2 Microsoft Lumia 640 LTE Headphone Jack Replacement, Back Cover: step 1, image 2 of 2
    • Use your thumb or fingernail on the edge/corner of the phone to pry the back cover off the phone.

  2. Microsoft Lumia 640 LTE Headphone Jack Replacement, Screen: step 2, image 1 of 3 Microsoft Lumia 640 LTE Headphone Jack Replacement, Screen: step 2, image 2 of 3 Microsoft Lumia 640 LTE Headphone Jack Replacement, Screen: step 2, image 3 of 3
    • Use the tweezers to pull back the sticker, revealing the screw underneath.

    • Be careful when removing the screws as they can strip easily.

  3. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 3, image 1 of 2 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 3, image 2 of 2
    • Use a T4 Torx driver to remove the screws in the four corners, along with the two in the middle left side (six total).

  4. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 4, image 1 of 2 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 4, image 2 of 2
    • Using the T4 Torx driver, unscrew the two screws.

    • Keep these screws separate from the screws from back of the phone to ensure that the right screws go where they belong.

  5. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 5, image 1 of 2 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 5, image 2 of 2
    • Use a plastic opening tool to separate the screen from the back plastic casing

    • Use tweezers to release the clip on the side of device, and remove the back of the phone.

  6. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 6, image 1 of 2 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 6, image 2 of 2
    • Using the tweezers or a spudger, pull the gold tab up gently.

    • Using tweezers or a spudger, lift the white connector up gently to completely detach the screen from the phone.

    • For motherboard replacement, skip to Step 11 after finishing this step.

  7. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 7, image 1 of 3 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 7, image 2 of 3 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 7, image 3 of 3
    • Using a plastic opening tool to carefully get under the gold strip.

    • Use tweezers to pull up the camera.

    • Use tweezers to pull up on the depth sensor.

    • This is held in by a strong adhesive.

  8. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 8, image 1 of 1
    • Use a plastic opening tool to pry up the ear speaker.

    • This is held in by strong adhesive.

  9. Microsoft Lumia 640 LTE Headphone Jack Replacement, Headphone Jack: step 9, image 1 of 1
    • Unscrew the 2 remaining screws with the T-4 bit.

  10. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 10, image 1 of 1
    • Use the tweezers to remove the speaker.

  11. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 11, image 1 of 3 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 11, image 2 of 3 Microsoft Lumia 640 LTE Headphone Jack Replacement: step 11, image 3 of 3
    • Use the plastic opening tool to lift up the black tab.

    • Use the tweezers to gently pull up on the gold tab.

    • Using the spudger, slowly get underneath the gold sticker and pry it up. This sticker is held down with a strong adhesive.

  12. Microsoft Lumia 640 LTE Headphone Jack Replacement: step 12, image 1 of 1
    • Use the tweezers to remove the orange insulator foam.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 404