Fix Your Stuff Community Store

Megawheels S10 Rear Mudguard Replacement

Introduction

This guide will go over the steps for replacing the rear mudguard on a Megawheels S10 electric scooter.

The mudguard serves as a manual brake for the scooter as well as providing a tail light, so when this piece has taken too much damage or stops working, it removes an important function to your scooter.

The process for this replacement is simple and does not require a lot of experience or prior information in order to complete.

What you need

  1. Megawheels S10 Rear Mudguard Replacement, Rear Mudguard: step 1, image 1 of 1

    • Hold down the power button and wait for a beep to ensure that the scooter is turned off.

    Edit

  2. Megawheels S10 Rear Mudguard Replacement: step 2, image 1 of 1

    • Put up the kickstand so that the scooter is upright.

    Edit

  3. Megawheels S10 Rear Mudguard Replacement: step 3, image 1 of 1

    • Unscrew the old mudguard.

    Edit

  5. Megawheels S10 Rear Mudguard Replacement: step 4, image 1 of 1

    • Grip the wheel and pull off the mudguard.

    Edit

  6. Megawheels S10 Rear Mudguard Replacement: step 5, image 1 of 1

    • Remove the connector.

    Edit

  7. Megawheels S10 Rear Mudguard Replacement: step 6, image 1 of 1

    • Attach the new mudguard's power connector.

    Edit

  8. Megawheels S10 Rear Mudguard Replacement: step 7, image 1 of 1

    • Line up the new mudguard with the screw holes and reinsert the screws.

    Edit
Conclusion

If these steps are followed correctly, then your manual break and tail light should function good as new!

Author

with 2 other contributors

Andrew DiCapo

Member since: 09/28/21

145 Reputation

1 Guide authored

Badges: 2

Team

University of North Texas, Team 2-9, Raign Fall 2021 Member of University of North Texas, Team 2-9, Raign Fall 2021

UNT-RAIGN-F21S2G9

2 Members

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 6

Past 30 Days: 30

All Time: 1,093