Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide walks your through the steps required to replace the trigger on the Makita DT01 drill.

Parts

No parts specified.

  1. Take out the beterry.
    • Take out the beterry.

  2. Unscrew the six screws on the top of the drill.
    • Unscrew the six screws on the top of the drill.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

    Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now
  4. Place the big trigger out to be able to remove the other trigger smoothly. Place the big trigger out to be able to remove the other trigger smoothly.
    • Place the big trigger out to be able to remove the other trigger smoothly.

  5. Take out the broken trigger. Take out the broken trigger.
    • Take out the broken trigger.

Ya'Rub Al Manwari

Member since: 02/15/2017

201 Reputation

2 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 50