Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Pre-req only

Parts

No parts specified.

  1. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  2. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Brett Hartt

Member since: 04/12/2010

114,662 Reputation

143 Guides authored

Team

iFixit Member of iFixit

Community

108 Members

9,940 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 391