Skip to main content

MacBook Pro 13" Unibody Early 2011 Lower Case Replacement

What you need

  1. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement, Lower Case: step 1, image 1 of 1
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

  2. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: step 2, image 1 of 2 MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: step 2, image 2 of 2
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

View Statistics:

Past 24 Hours: 3

Past 7 Days: 18

Past 30 Days: 50

All Time: 35,909