MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement

You're viewing a previously published version of this guide. View latest version

May 16, 2019 - 07:24:37

May 16, 2019 - 07:24:37 Dec 04, 2015 - 06:39:49 Dec 04, 2015 - 06:39:49 Dec 04, 2015 - 06:39:19 Dec 04, 2015 - 06:38:03 Dec 04, 2015 - 06:36:51 Dec 04, 2015 - 06:35:30 Nov 11, 2015 - 05:01:44 Nov 11, 2015 - 05:01:44 Nov 11, 2015 - 05:01:44 Nov 11, 2015 - 05:01:44 Nov 04, 2015 - 08:01:53 Nov 04, 2015 - 08:01:53 Nov 04, 2015 - 08:01:53 Nov 04, 2015 - 08:01:53 Jul 31, 2013 - 04:44:22 Apr 19, 2011 - 05:05:23 Mar 29, 2011 - 02:34:20 Mar 29, 2011 - 02:34:16 Mar 29, 2011 - 02:34:06 Mar 29, 2011 - 02:34:02 Mar 29, 2011 - 02:33:55 Mar 29, 2011 - 02:33:51 Mar 29, 2011 - 02:33:44 Mar 29, 2011 - 02:33:40 Mar 22, 2011 - 12:27:16 Mar 22, 2011 - 12:05:26

Newer

Introduction

Internal prerequisite.

What you need

Step 1 Hard Drive

MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement, Hard Drive: step 1, image 1 of 1

Remove the two Phillips screws securing the hard drive bracket to the upper case.
These screws will remain attached to the hard drive bracket.

Step 2

Remove the hard drive bracket.
The hard drive bracket may be firmly seated against the upper case.

Step 3

Use the attached pull tab to lift the hard drive out of the upper case.
Don't try to completely remove the hard drive just yet. It is still attached to the hard drive cable.