Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

Prereq to disconnect the battery

Parts

No parts specified.

  1. If necessary, remove the plastic cover adhered to the battery contact board.
    • If necessary, remove the plastic cover adhered to the battery contact board.

  2. Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board. Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.
    • Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board.

    • Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.

  3. Bend the battery connector up out of the way to prevent accidental contact with its socket during your repair.
    • Bend the battery connector up out of the way to prevent accidental contact with its socket during your repair.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Member since: 10/18/2012

434,330 Reputation

547 Guides authored

Team

iFixit Member of iFixit

Community

134 Members

14,946 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 714