Skip to main content

Introduction

The process to replace the battery involves a few steps. The first step is unscrewing the 15 screws that hold the bottom plate together to gain access to the battery. The second step is unplugging the battery carefully to be replaced.

Parts

No parts specified.

  1. Remove the eleven 5mm screws with a Phillips #0 bit. Remove the four 2.5mm screws with a Phillips #0 bit.
    • Remove the eleven 5mm screws with a Phillips #0 bit.

    • Remove the four 2.5mm screws with a Phillips #0 bit.

  2. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  3. After opening the bottom plate, locate the battery and the battery connection. After opening the bottom plate, locate the battery and the battery connection.
    • After opening the bottom plate, locate the battery and the battery connection.

  4. Unplug the battery connection carefully from the motherboard, and remove the old battery. Unplug the battery connection carefully from the motherboard, and remove the old battery.
    • Unplug the battery connection carefully from the motherboard, and remove the old battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Azher Hamid

Member since: 09/28/2017

354 Reputation

2 Guides authored

Team

USF Tampa, Team S1-G4, Nance Fall 2017 Member of USF Tampa, Team S1-G4, Nance Fall 2017

USFT-NANCE-F17S1G4

3 Members

5 Guides authored

One Comment

The screws on corners doesnt have the same length. The Guide is wrong carefull!

Hüseyin Temizkan - Reply

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 25

Past 30 Days: 99

All Time: 2,412