Skip to main content

Introduction

This guide will show a user how to replace the back cover on the MSI Apache Pro 004 laptop.

  1. Start with the bottom of the laptop facing up.
    • Start with the bottom of the laptop facing up.

  2. Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver. Remove the bottom plate
    • Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.

    • Remove the bottom plate

    • Keep track of all the screws and which slot they came from, as they slightly differ. We recommend this system: lay out on a piece of paper and pretending the paper is the device. Place the screws on the paper approximately where they would go

  3. Remove the screw holding down the battery with a PH1 screwdriver. Pull out the battery. Pull out the battery.
    • Remove the screw holding down the battery with a PH1 screwdriver.

    • Pull out the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Arian Arana

Member since: 02/13/2018

187 Reputation

1 Guide authored

Team

USF Tampa, Team S15-G5, Boczar Spring 2018 Member of USF Tampa, Team S15-G5, Boczar Spring 2018

USFT-BOCZAR-S18S15G5

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 31

Past 30 Days: 156

All Time: 9,850