This translation may not reflect the most recent updates from the source guide. Help update the translation or view the source guide.
Introduction
Here I’ll show you how to remove the fly screen of the MPK VisionVent S eco (Model 27) roof vent while it’s still installed.
-
-
-
Make sure the frame is pointing straight down at a right angle.
-
Now,pull the fly screen frame straight down, if necessary with a bit of pressure against the installed window frame.
-
This will unclip the frame from the hinges.
-
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
87%
hainzy is helping us fix the world! Want to contribute?
Start translating ›
