Introduction

To begin this guide please have with you all the required material and components. This guide should not take very long, depending on your skill level.

Image 1/1: Make sure the device is unplugged from the wall.
  • Look the device over.

  • Make sure the device is unplugged from the wall.

Add Comment

Image 1/1:
  • Remove two screws on top panel.

Add Comment

Image 1/1:
  • Take top panel off of device.

Add Comment

Image 1/1:
  • Identify the mother board.

Add Comment

Image 1/1:
  • Unplug wires from mother board component. Do not be afraid to tug. The wires are strong and should not tear.

Add Comment

Image 1/1: When installing motherboard back into device make sure wires are snug in their casings.
  • Buy new mother board.

  • When installing motherboard back into device make sure wires are snug in their casings.

  • Repeat steps in reverse to put device back together.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Justin

Member since: 01/21/2015

211 Reputation

2 Guides authored

Team

Penn State, Team 1-41, Kaschak Winter 2015 Member of Penn State, Team 1-41, Kaschak Winter 2015

PSU-KASCHAK-W15S1G41

4 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 421