Introduction

Add or remove links in order to replace broken links or resize the watch band.

Parts

No parts required.

Measure the watch band to decide how many links to remove.
  • Measure the watch band to decide how many links to remove.

  • It is better to remove an even number of links to keep the clasp centered and symmetrical.

Separate the clasp by pushing in the spring pin. Separate the clasp by pushing in the spring pin.
  • Separate the clasp by pushing in the spring pin.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Remove the clasp from the lug by pushing in on the spring  pin. Remove the clasp from the lug by pushing in on the spring  pin.
  • Remove the clasp from the lug by pushing in on the spring pin.

To remove the first link and lug, push in on the link pin to raise it up. Grasp the link pin and pull it out from the link.
  • To remove the first link and lug, push in on the link pin to raise it up.

  • Grasp the link pin and pull it out from the link.

Push in on the second link pin. Grasp the link pin and pull it up and out.
  • Push in on the second link pin.

  • Grasp the link pin and pull it up and out.

Pull the link apart to remove it from the band.
  • Pull the link apart to remove it from the band.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jacob Posey

Member since: 02/28/2017

111 Reputation

1 Guide authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 101