Introduction

If your Logitech Zone Vibe 100 is having difficulties with the microphone, or you are having a hard time being heard for audio reasons- be sure to follow this guide.

This guide requires soldering. If you're unfamiliar with soldering, review the How to Solder and Desolder Connections guide and take appropriate precautions before beginning.

What you need

Step 1 Earpads

Logitech Zone Vibe 100 Microphone Replacement, Earpads: step 1, image 1 of 1

Pry open both the right earpad and left earpad carefully with your hands.

Edit

Step 2 Microphone

Logitech Zone Vibe 100 Microphone Replacement, Microphone: step 2, image 1 of 1

On the left speaker housing, remove the four 4.5 mm screws with a T3 Torx screwdriver.
Remove the single 3.3 mm Phillips #00 screw.

Edit

Step 3

Remove plastic cover from the microphone hinge with your hands and clean any debris with a microfiber cloth.

Edit

Step 4

Desolder the microphone connection from the PCB.
Remove the microphone.

Edit

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.