Logitech UE MegaBoom Power Button Replacement

Step 1 Outer Mesh




• Locate the ends of the speaker.
• Put a plastic opening tool in-between the rubber end and the mesh.
• Apply a upward force in order to pry open the end.
• Apply this procedure to the other side as well.
• Will take force.
• Using metal tools may permanently mar your device.
Step 2




• Take the Jimmy and pry up the rubber strip that has the volume buttons on it.
• You will hear clicks as it pries up, don't worry.
• Remove all the rubber you pried off.
Step 3
• Use tweezers to lift end of plastic retainer on edge of mesh out of its channel.
• Work the plastic retainer out of the channel all the way around the speaker.
• Be gentle, it is easy to damage the fabric.
• Repeat for other side.
Step 4 Power Button
• Locate the end of the speaker which contains the power button.
• The circuit board which contains the power button should be visible.
• Grasp the outer rim of this end cap and pull in an upward motion.
• This might require some force.
Step 5
• Insert a opening tool between the circuit board and one of the black clips which is holding the board in place.
• Using the opening tool pry up on the clip allowing the board to be freed. Pry up on the second clip to fully release the board.
• Using your fingers lift the board out of place.

Author

with 2 other contributors

Oscar Ambriz

Member since: 09/27/17

958 Reputation

6 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

Cal Poly, Team S9-G2, Banghart Fall 2017 Member of Cal Poly, Team S9-G2, Banghart Fall 2017

CPSU-BANGHART-F17S9G2

4 Members

14 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview