Introduction
The back panel protects the inside of your device from damage. If your back panel is broken, use this guide to replace it. Only remove this if your trying to replace something on the inside or the back panel itself.
What you need
-
-
Make sure back panel is facing up.
-
Remove eleven 5mm screws with the T5 Torx Screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
University of Memphis, Team S1-G4, Kim Spring 2017 Member of University of Memphis, Team S1-G4, Kim Spring 2017
UM-KIM-S17S1G4
4 Members
2 Guides authored
