Introduction

Learn how to access the phone interior in this crucial backplate disassembly guide

Parts

No parts required.

Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone
  • Remove the 4.9 mm torx head screws located on the camera plate on the back of the phone

Add Comment

Remove the 3.65 mm Torx head screws at the bottom of the phone.
  • Remove the 3.65 mm Torx head screws at the bottom of the phone.

Add Comment

Remove the SIM card tray by pushing a pin into the hole on the side of the phone. Remove the SIM card tray by pushing a pin into the hole on the side of the phone.
  • Remove the SIM card tray by pushing a pin into the hole on the side of the phone.

Add Comment

Push the Spudger along the gap between the phone and the backplate to separate them. Push the Spudger along the gap between the phone and the backplate to separate them.
  • Push the Spudger along the gap between the phone and the backplate to separate them.

Add Comment

Carefully pull the backplate away from the phone.
  • Carefully pull the backplate away from the phone.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Bryan Sepulveda

Member since: 09/15/2016

423 Reputation

3 Guides authored

Team

USF Tampa, Team 18-3, Blackwell Fall 2016 Member of USF Tampa, Team 18-3, Blackwell Fall 2016

USFT-BLACKWELL-F16S18G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 34

All Time: 358