Introduction

Users will learn how to remove the bezel from a Lenovo Thinkpad x230.

Image 1/1: Disconnect the charging cable from the computer.
  • Turn off the computer.

  • Disconnect the charging cable from the computer.

  • Failure to unplug the cable could result in electric shock.

Add Comment

Image 1/1: The red rectangle shows the location of the battery.
  • Flip the computer upside down.

  • The red rectangle shows the location of the battery.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.

Add Comment

Image 1/1:
  • Remove the plastic screw covers with an iFixit opening pick.

Add Comment

Image 1/2: Image 2/2:
  • Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Carefully remove the plastic bezel cover using an iFixit opening pick.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Lino Virgen

Member since: 10/10/2016

444 Reputation

3 Guides authored

Team

Texas Tech, Team 6-3, Bennett Fall 2016 Member of Texas Tech, Team 6-3, Bennett Fall 2016

TTU-BENNETT-F16S6G3

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 28

Past 30 Days: 107

All Time: 762