Introduction

This guide will show you how to replace your Optical/ DVD Drive if yours has become jammed or broken.

Guide Notes

  • This installation is hardware only, and does not require any firmware installments.
  • DVD drive may carry charge if laptop was recently active, use ESD bracelet to discharge any currents.
  • Optical Lasers emit radiation, be careful NOT to break/open the drive casing.

Tools

No tools required.

Parts

  1. Slide and hold the two locking latches to the unlocked position. Slide and hold the two locking latches to the unlocked position. Slide and hold the two locking latches to the unlocked position.
    • Slide and hold the two locking latches to the unlocked position.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. While holding the latches,  slide the DVD drive away from the compartment and remove it from the device.
    • While holding the latches, slide the DVD drive away from the compartment and remove it from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Gabriel Cordova

Member since: 10/02/2017

601 Reputation

4 Guides authored

Team

USF Tampa, Team S1-G2, Thompson Fall 2017 Member of USF Tampa, Team S1-G2, Thompson Fall 2017

USFT-THOMPSON-F17S1G2

4 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 102