Introduction

The Lenovo Ideatab A1107 Speaker Replacement guide will show users how to safely remove the speaker from the Lenovo Ideatab A1107. Included in the guide are the proper tools needed to complete the replacement, as well as photos with mark-ups.

Insert a plastic opener in-between the black back panel and the silver body of the tablet. Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.
  • Insert a plastic opener in-between the black back panel and the silver body of the tablet.

  • Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.

Add Comment

Use a Phillips #000 screwdriver to remove the seventeen 4mm screws. Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.
  • Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.

Add Comment

Lift up and remove the interior casing to expose the inner components.
  • Lift up and remove the interior casing to expose the inner components.

  • Do not be alarmed if the volume button and lock button fall off when removing the interior casing.

Add Comment

Use tweezers or hands to disconnect speaker wires.
  • Use tweezers or hands to disconnect speaker wires.

Add Comment

Use tweezers to pull the speaker off of the casing.
  • Use tweezers to pull the speaker off of the casing.

Add Comment

Remove the speaker component from the rubber casing.
  • Remove the speaker component from the rubber casing.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 2

All Time: 50