Introduction

Step by step guide to replacing the Wi-Fi card in your Lenovo 110-11IBR.

Unscrew the eleven 4 mm Phillips screws on the bottom of the device. Unscrew the eleven 4 mm Phillips screws on the bottom of the device.
  • Unscrew the eleven 4 mm Phillips screws on the bottom of the device.

Add Comment

Loosen the back lid using a plastic opening tool. Lift the back lid off of the device.
  • Loosen the back lid using a plastic opening tool.

  • Lift the back lid off of the device.

Add Comment

Remove the battery connector using a plastic opening tool, from its socket. Remove the two pieces of tape that are holding the battery down.
  • Remove the battery connector using a plastic opening tool, from its socket.

  • Remove the two pieces of tape that are holding the battery down.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the five 4 mm Phillips screws. Lift the battery up and put it to the side. Lift the battery up and put it to the side.
  • Remove the five 4 mm Phillips screws.

  • Lift the battery up and put it to the side.

Add Comment

Locate the Wi-Fi card.
  • Locate the Wi-Fi card.

Add Comment

Disconnect the two wires that are connected to the Wi-Fi card by gently pulling them up.
  • Disconnect the two wires that are connected to the Wi-Fi card by gently pulling them up.

Add Comment

Unscrew the one 4mm screw keeping the card in place. Unscrew the one 4mm screw keeping the card in place.
  • Unscrew the one 4mm screw keeping the card in place.

Add Comment

Gently pull the Wi-Fi card out of place. Gently pull the Wi-Fi card out of place.
  • Gently pull the Wi-Fi card out of place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 25

All Time: 179