Introduction

This replacement requires small Phillips head screwdrivers. It is also recommended to research if the replacement card will work with the laptop, as only certain cards are compatible. And, as when taking apart any sensitive electronics, be sure to touch something metal to remove any static charge you may have accumulated.

Parts

No parts required.

Slide the left battery lock to the left
  • Slide the left battery lock to the left

  • While holding the right battery lock to the right, pull the battery out.

Add Comment

Slide the disk drive lock up.
  • Slide the disk drive lock up.

  • While holding the lock in the middle of the laptop up, remove the disk drive

Add Comment

  • Unscrew all nine of the backplate screws with a #0 Phillips screwdriver.

Add Comment

  • Carefully pry the backplate off of the laptop.

Add Comment

  • Pry the wireless antenna connectors off of the network card.

  • Be careful not to damage the connectors on the wireless card.

Add Comment

  • Unscrew the screw holding the network card in place with a #0 Phillips screwdriver

Add Comment

  • Slide the network card out of the connector.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alex David

Member since: 10/02/2017

101 Reputation

1 Guide authored

Team

One Comment

Steps to White list the Newly installed network card in the BIOS. Follow Steps : http://www.thecosmosphere.com/how-to-rem...

I used the Intel Centrino Advanced-N 6235 6235ANHMW Wlan Bluetooth 4.0 Half MINI Card 802.11 a/b/g/n Dual-band 300 Mbps as replacement.

Amazon : https://www.amazon.com/gp/product/B009SJ...

John Santhosh - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 18

Past 30 Days: 77

All Time: 365