Skip to main content

Introduction

Use this guide to fully remove the back panel on your Lenovo IdeaPad Flex 5-1470 laptop.

Removing the back panel of the laptop is the most crucial part of most all repairs, seeing as it precedes being able to replace any of the internal parts.

Before using this guide, make sure to review the troubleshooting page—oftentimes, laptops can be fixed without disassembling them.

Make sure to power off your laptop completely and disconnect from any external power source before beginning the process of removal.

  1. Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.
    • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

  2. Use the plastic opening tool to lift up and remove the casing. Use the plastic opening tool to lift up and remove the casing.
    • Use the plastic opening tool to lift up and remove the casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tori Nardoni

Member since: 01/23/2020

286 Reputation

3 Guides authored

Team

Cal Poly, Team S2-G5, White Winter 2020 Member of Cal Poly, Team S2-G5, White Winter 2020

CPSU-WHITE-W20S2G5

4 Members

15 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 15

Past 30 Days: 61

All Time: 892