Skip to main content

Lenovo IdeaCentre K410 RAM Module Replacement

What you need

  1. Lenovo IdeaCentre K410 RAM Module Replacement, Side Panel: step 1, image 1 of 1
    • Lay the computer down on its side as shown.

    • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

  2. Lenovo IdeaCentre K410 RAM Module Replacement: step 2, image 1 of 1
    • Gently slide the side panel straight back and remove from the computer.

  3. Lenovo IdeaCentre K410 RAM Module Replacement, RAM Module: step 3, image 1 of 1
    • Push down on the white clips on both sides of the memory module to release it.

    • Gently pull up on the memory module to remove it from the unit.

Conclusion

To reassemble your device, follow these instructions in reverse order.

When inserting the memory module, make sure that the notch on it aligns correctly with the key on the memory connector. Push the module straight down into the connector until the retaining clips close.

2 other people completed this guide.

Timothy Grebe

Member since: 10/19/14

1,619 Reputation

9 Guides authored

Team

Cal Poly, Team 10-39, Amido Fall 2014 Member of Cal Poly, Team 10-39, Amido Fall 2014

CPSU-AMIDO-F14S10G39

4 Members

18 Guides authored

2 Comments

sounds very hard to replace a ram “sarcastically“

you probley can replace a ram if you know what ram is so

remliv - Reply

But it is still good to have guides on everything

im glad that ifixit exists

remliv - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 7

All Time: 1,425