Introduction
The stand base on this computer stops the back cover from being removed, preventing you from accessing the components inside. No tools are needed for this, as it is designed to be screwed and unscrewed by hand.
What you need
-
-
Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team S16-G3, Banghart Winter 2018 Member of Cal Poly, Team S16-G3, Banghart Winter 2018
CPSU-BANGHART-W18S16G3
4 Members
9 Guides authored
