Skip to main content

Introduction

Having trouble with your hard drive? Here's some steps to replace the hard drive on the Lenovo G70-80.

Parts

No parts specified.

  1. Set the laptop on its front so you can see the back panel.
    • Set the laptop on its front so you can see the back panel.

  2. Remove the two placeholder screws, and then proceed to pull off the back of the laptop. Remove the two placeholder screws, and then proceed to pull off the back of the laptop. Remove the two placeholder screws, and then proceed to pull off the back of the laptop.
    • Remove the two placeholder screws, and then proceed to pull off the back of the laptop.

  3. Using your Phillips Screwdriver, remove the four screws around the hard drive. Using your Phillips Screwdriver, remove the four screws around the hard drive. Using your Phillips Screwdriver, remove the four screws around the hard drive.
    • Using your Phillips Screwdriver, remove the four screws around the hard drive.

  4. Shift the hard drive to the right and you will feel it click. That means it has been unlocked and can be removed. Shift the hard drive to the right and you will feel it click. That means it has been unlocked and can be removed. Shift the hard drive to the right and you will feel it click. That means it has been unlocked and can be removed.
    • Shift the hard drive to the right and you will feel it click. That means it has been unlocked and can be removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 18

Past 30 Days: 44

All Time: 2,133