Introduction
Many of the replacement guides for this model will be internal parts that are accessed by first removing the back access panel. Removing this part is very simple; the only tool needed is a small Philips screwdriver to remove three screws. Removing this part gives access necessary for future guides.
What you need
-
-
Remove the three 6mm Phillips #0 screws holding the back access panel on.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
Central Washington University, Team S1-G7, Pengilly Fall 2018 Member of Central Washington University, Team S1-G7, Pengilly Fall 2018
CWU-PENGILLY-F18S1G7
3 Members
6 Guides authored
