Free Shipping on Domestic Orders $75+

Introduction

This guide helps you replace the Lenovo Flex 2-15 speakers. You might need to replace your speaker when the sound becomes distorted or stops producing sound.

What you need

Step 1 Battery

Lenovo Flex 2-15 Speaker Replacement, Battery: step 1, image 1 of 1

Begin by taking the back plate off of your device. Using a Phillips head screw driver, take out the highlighted screws for your device.

Edit

Ask FixBot

Step 2

Remove battery from the motherboard by unplugging the cord and removing the screws.

Edit

Ask FixBot

Step 3

Once you have the battery removed, locate the cable for your new battery and connect it on the same port from your old battery. Secure it onto the laptop by using the screws. After this step is complete, complete step 1 in reverse order to secure the plate cover over your motherboard.

Edit

Ask FixBot

Step 4 Speaker

Lenovo Flex 2-15 Speaker Replacement, Speaker: step 4, image 1 of 1

Use a Phillips #00 screwdriver to remove the one 4 mm screw on the left speaker.

Edit

Ask FixBot

Step 5

Use a Phillips #00 screwdriver to disconnect the one 4 mm screw on the right speaker.

Edit

Ask FixBot

Step 6

Disconnect the speaker the connector on the right speaker from the motherboard by pulling the connector out with your fingernail.

Edit

Ask FixBot

Step 7

Gently lift the two speakers out with your hands.

Edit

Ask FixBot

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Cancel: I did not complete this guide.