Introduction

You will need a screwdriver with a PH000 head, and a prying tool.

Remove the back cover by  prying it open with the metal spudger tool.
  • Remove the back cover by prying it open with the metal spudger tool.

Add Comment

Remove the two screws with a PH000 head screwdriver.
  • Remove the two screws with a PH000 head screwdriver.

  • Keep all your screws in one place.

Add Comment

  • Remove the metal piece.

  • Keep this piece safe, as you will need it to reassemble the device again.

Add Comment

  • Remove the battery by lifting it up using a plastic spudger.

Add Comment

  • Disconnect the cable from the connection.

  • Be careful not to tear or bend the cable.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jay Shah

Member since: 09/25/2017

307 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 27

All Time: 275