1. Slide the battery cover release towards top of phone. Place one finger at each side of the battery cover.
    • Slide the battery cover release towards top of phone.

    • Place one finger at each side of the battery cover.

    • Lift and remove the battery cover.

  2. Place a finger at the top corner of the battery and lift out of the phone. Place a finger at the top corner of the battery and lift out of the phone.
    • Place a finger at the top corner of the battery and lift out of the phone.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use the spudger to lift up the two screw covers at the top of the phone. Remove all four Phillips#00 (3.3mm) screws with screwdriver.
    • Use the spudger to lift up the two screw covers at the top of the phone.

    • Remove all four Phillips#00 (3.3mm) screws with screwdriver.

  5. Use the spudger to lift up the rear case from the phone. Note: Rear case is connected on all sides and will have to be detached on all sides before removal. Remove the rear case from the device.
    • Use the spudger to lift up the rear case from the phone.

    • Note: Rear case is connected on all sides and will have to be detached on all sides before removal.

    • Remove the rear case from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Cataldo

Member since: 01/23/2012

1 Reputation

1 Guide authored

Team

Cal Poly, Team 3-29, Amido Winter 2012 Member of Cal Poly, Team 3-29, Amido Winter 2012

CPSU-AMIDO-W12S3G29

4 Members

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 496