LG LX160 Back Casing Replacement

Step 1 Battery

• Place the phone on a flat surface with the back facing upward.
• Remove the back panel by placing your thumb on the LG logo and sliding the panel in a downward motion until the panel is removed.
Step 2

• Once the panel is removed, you will see the battery. Remove the battery by sliding your finger into the notch where the LG logo was on the panel and lift the battery.
Step 3
• Remove the battery completely from the phone and place the battery off to the side.
Step 4 Back Casing
• Before continuing pull off all the rubber tabs to the headphones, and the power input.
Step 5
• Now turn the phone so that you can see the back where the battery was. Using a screw driver, unscrew the 6 screws holding the back casing together.
Step 6
• At the top of the logic board there is a small rectangle with a white pad on it, use your tweezers and gently grip the neck of the orange wire.
• Gently pull up on the orange wire until it comes loose. It may take some force so do not be concerned with being overly gentle.

Author

with 7 other contributors

Shane Smith

Member since: 01/14/10

1 Reputation

2 Guides authored

Badges: 5

• 
• 
• 

+2 more badges

Team

Cal Poly, Team 11-2, Forte Winter 2010 Member of Cal Poly, Team 11-2, Forte Winter 2010

CPSU-FORTE-W10S11G2

5 Members

10 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview