Kyocera Hydro Vibe Trim Replacement

Step 1 Battery

• Make sure that the device is turned off before beginning.
• Look for a small indentation on the bottom of the phone.
• Insert the plastic opening tool into the indentation and lift off the back casing.
Step 2




• The large white component is the battery. Look for a small indentation under the arrow that says "LIFT."
• Place the plastic opening tool in the indentation and lift the battery out of the socket.
Step 3 Trim
• Locate the screws holding the trim which are the four side screws on each corner.
• Remove each screw with a Phillips screw driver #J00. The screws are 5mm Phillips.
Step 4
• Locate the clasps holding the trim in place.
• You will need to insert the metal spudger through the bottom of the trim and slowly push upwards to release the clasps.
Step 5
• The trim is flimsy.
• This is what the trim will look like once removed.

Author

with 2 other contributors

Phillip Newman

Member since: 01/31/16

142 Reputation

1 Guide authored

Badges: 8

• 
• 
• 

+5 more badges

Team

University of Kentucky Louisville, Team 1-5, Matravers Spring 2016 Member of University of Kentucky Louisville, Team 1-5, Matravers Spring 2016

LOUISVILLE-MATRAVERS-S16S1G5

3 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview