Kurio 7 Battery Replacement

You're viewing a previously published version of this guide. View latest version

Jul 01, 2016 - 04:15:32

Jan 16, 2020 - 03:12:02 Jul 01, 2016 - 04:15:32 Jul 01, 2016 - 04:15:31 Oct 22, 2015 - 10:42:20 Jul 20, 2015 - 04:18:30 Jul 20, 2015 - 02:08:17 Jul 20, 2015 - 02:03:35 Jul 20, 2015 - 02:02:34 Jul 18, 2015 - 11:23:33 Jun 09, 2014 - 12:42:46 Jun 09, 2014 - 12:42:37 May 28, 2014 - 11:36:53 May 19, 2014 - 02:15:49 May 19, 2014 - 02:14:45 May 19, 2014 - 12:29:03 May 19, 2014 - 12:28:10 May 18, 2014 - 01:31:52 May 17, 2014 - 01:16:19 May 17, 2014 - 01:01:29 May 17, 2014 - 01:00:39 May 17, 2014 - 12:23:03 May 17, 2014 - 12:20:43 May 17, 2014 - 12:20:38 May 17, 2014 - 12:19:25 May 17, 2014 - 12:18:30 May 17, 2014 - 12:11:24 May 17, 2014 - 12:10:42 May 17, 2014 - 12:07:37 May 15, 2014 - 02:54:12 May 15, 2014 - 02:50:22 May 15, 2014 - 02:42:53 May 15, 2014 - 02:42:02 May 15, 2014 - 02:38:56 May 15, 2014 - 02:38:04 May 15, 2014 - 02:29:39 May 15, 2014 - 02:29:11

Newer

Introduction

Accessing the battery is straight-forward, but the replacement requires soldering, and that can be tricky. Soldering involves melting two pieces of metal together so that they become one piece. Replacing the battery should prevent the Kurio 7 from malfunctioning.

What you need

Step 1 Back Panel

Kurio 7 Battery Replacement, Back Panel: step 1, image 1 of 3

Kurio 7 Battery Replacement, Back Panel: step 1, image 2 of 3

Kurio 7 Battery Replacement, Back Panel: step 1, image 3 of 3

Begin by removing the rubber cover from the Kurio 7.

Step 2

Remove the four 30 mm Phillips #00 screws from the outer case.

Step 3

Insert the plastic opening tool in the gap between the front cover and the back cover of the device.
Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.
Be careful not to break off the tabs that hold the front cover and the back cover together.

Step 4

Once all of the tabs are removed, the back cover should come off easily.
Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

Step 5 Battery

Kurio 7 Battery Replacement, Battery: step 5, image 1 of 1

Use a credit card, or other thin object, to separate the battery from the screen.
Be sure to work the card slowly and carefully in order to not damage, break, or deform the battery.

Step 6

Desolder, or separate using the desoldering braid, the marked areas on the motherboard to remove the old battery.
Refer to our soldering guide on how to solder and desolder.