Fix Your Stuff Community Store

Kurio 10S Speakers Replacement

Introduction

Replacing the speakers can help create better sound quality if there is a problem with sound playing on your device. This guide will walk you through the steps to replace the speakers on your Kurio 10S.

What you need

  1. Kurio 10S Speakers Replacement, Back Cover: step 1, image 1 of 1

    • Turn the device over and place it with the screen down on a flat surface that is clean so the screen does not get scratched.

    Edit

  2. Kurio 10S Speakers Replacement: step 2, image 1 of 2 Kurio 10S Speakers Replacement: step 2, image 2 of 2

    • Locate the four screws, two on each side.

    • Using the philips head screwdriver, carefully remove each screw and keep them together in a safe location.

    Edit

  3. Kurio 10S Speakers Replacement: step 3, image 1 of 1

    • Once all screws are removed, use a spudger to get under a corner and unclip the hooks.

    • Once the spudger is under the cover, slide it all the way around the device, pushing lightly into the device making sure it stays under the cover until all the clips are removed.

    • The back cover is difficult to remove, so do not be afraid of using some force once all of the clips have been removed.

    Edit

  5. Kurio 10S Speakers Replacement: step 4, image 1 of 1

    • The back cover should then be able to easily be removed from the device and you should see the battery and other internal components.

    Edit

  6. Kurio 10S Speakers Replacement, Speakers: step 5, image 1 of 1

    • Locate the two speakers on either side of the device

    Edit

  7. Kurio 10S Speakers Replacement: step 6, image 1 of 2 Kurio 10S Speakers Replacement: step 6, image 2 of 2

    • Carefully disconnect the black and red wire from the motherboard using tweezers

    • Caution: motherboard parts are very fragile, so be careful when removing the wires

    Edit

  8. Kurio 10S Speakers Replacement: step 7, image 1 of 1

    • Remove the speaker from its holder.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 2 other contributors

Hanna Desilets

Member since: 03/25/15

122 Reputation

1 Guide authored

Badges: 4

+1 more badge

Team

UMass Dartmouth, Team 1-6, Shastany Spring 2015 Member of UMass Dartmouth, Team 1-6, Shastany Spring 2015

UMASSD-SHASTANY-S15S1G6

4 Members

8 Guides authored

One Comment

This tutorial was veryhelpful

Ralph Watson - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 221