Introduction

This guide will walk you through the process of replacing the back cover of the Kodak Signet 35.

While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera.
  • While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera.

Add Comment

Deck the Halls
With tools and Fix Kits
Open the back cover and it will unhitch on the left.
  • Open the back cover and it will unhitch on the left.

This photo is a bit dark.

Patty Remmell - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christopher Negron

Member since: 09/11/2016

113 Reputation

1 Guide authored

Team

USF Tampa, Team 6-3, Remmell Fall 2016 Member of USF Tampa, Team 6-3, Remmell Fall 2016

USFT-REMMELL-F16S6G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 10

All Time: 145