Introduction

This guide will explain how you can replace the battery cover on your Kodak Easyshare Z981.

Parts

No parts required.

Open the battery cover and remove the AA batteries from the camera if any are inserted.
  • Open the battery cover and remove the AA batteries from the camera if any are inserted.

Add Comment

Use a 00 Phillips-Head screwdriver
  • Use a 00 Phillips-Head screwdriver

  • Remove the 3 mm screws from the camera.

    • Four (4) screws are in the bottom of the device

    • Four (4) screws are inside the battery cover

It isn’t the back cover which is defalse but the 3 plastic pin which the battery cover open and close. Does this part must be change.

 This is my koday mode KKL-Z981(B)

Jean-Louis Lavoie - Reply

It is’nt the back cover which is defalque but the 3 plastic pins on which the cover  open or close to charge or remove the battery.Thank’s

Does  this piece be replace ?

Jean-Louis Lavoie - Reply

  • Start from a corner and gently remove the bottom cover.

    • The cover will easily lift off, so not much pressure is required.

  • Be gentle while removing the cover, to avoid breaking the plastic

Add Comment

  • Remove the bottom of the battery cover first, and then the top.

    • The hinge is simple, the screwdriver is no longer necessary.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Olivia Boyna

Member since: 03/03/2015

452 Reputation

3 Guides authored

4 Comments

where can i buy it?

Lizette Nin - Reply

PLEASE help? I can't find this part anywhere?

thecarlisles - Reply

Did anyone ever find the parts to complete this task? It's exactly what I need to do but cant find the bottom plate anywhere.

Billy T - Reply

I need the bottom panel also. If anyone knows where to purchase it please email me kpw1god@yahoo.com

kpw1god - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 21

All Time: 973