Introduction

The lens cover protects the lens from being scratched or damaged. Follow these simple steps to remove and replace a cracked or damaged lens cover.

  1. Squeeze the buttons on the sides of the lens cap and remove from lens. Squeeze the buttons on the sides of the lens cap and remove from lens.
    • Squeeze the buttons on the sides of the lens cap and remove from lens.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Pull the lens cover string down so that the loop underneath the bracket  sits on top of the cover string. Push up so that the string starts to come out of the  top loop. Grab the string from above the loop and pull up.
    • Pull the lens cover string down so that the loop underneath the bracket sits on top of the cover string. Push up so that the string starts to come out of the top loop.

    • Grab the string from above the loop and pull up.

  4. Thread the lens cover through the loop and pull the string out of the metal bracket. Thread the lens cover through the loop and pull the string out of the metal bracket.
    • Thread the lens cover through the loop and pull the string out of the metal bracket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Melanie Martin

Member since: 10/19/2016

301 Reputation

3 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 47