Introduction

The SD/MMC is the storage device of the camera. If you're camera memory is full or the pictures won't save, replacing the card or taking it out may be necessary to save your pictures. To learn how to replace the SD/MMC, follow this guide.

  1. Flip open the door on the right side of the camera, when looking at the LCD screen.
    • Flip open the door on the right side of the camera, when looking at the LCD screen.

    • This door has a memory card and A/V OUT symbol on it.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Gently push SD/MMC to eject.
    • Gently push SD/MMC to eject.

    Add Comment

    • Pull SD/MMC out of the camera.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One Comment

what can I do my camera will not take the sd card any more. I can try to put it in and it wont lock in just pops back up

val - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 3

All Time: 247