What you need
-
-
Use a TX10 screwdriver
-
Remove the housing screws on the rear of the device.
-
6 long screws
-
3 short screws
-
-
-
-
Place the device with the white lid facing up.
-
Start to carefully lift the lid at the front of the suction nozzle. Slowly work your way up to the stem.
-
-
-
Now you can lift the flap of the vacuum cleaner bag. This was only held by the white lid.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
